Many people now own smartphones that run on batteries. Calibrating the newly installed Smart Battery is essential if you are replacing the battery due to possible damage or deterioration. The point of this is that your phone will show an accurate reading of the state of charge.
Calibration is a measurement technique in which measurements provided by a device under test are compared against a calibration standard of known accuracy. Also, phone calibration ensures you have a quality battery installed.
There are other reasons to perform phone calibration:
1. The phone battery is new.
2. The cell phone battery may have been modified or repaired.
3. When the battery is stored for a long time
4. When the working time of the battery is over
5. After or before critical measurements are performed on the battery.
6. The battery may have been damaged by vibration, shock or physical damage. These events tend to potentially compromise the integrity of the battery calibration.
7. If you observe that your battery charge status is not normal.
In short, calibrating your Android battery or any phone battery means getting the OS to correct some broken information so that it describes the actual battery level.
Should you calibrate your phone battery?
The answer is yes. Phone battery calibration is very important if you want the accuracy of your phone’s state of charge. When you use your phone, your phone’s battery drains and its capacity decreases, depending on a number of factors, including heat, usage, and age.
Many people complain that their phone battery drains faster. Your battery may discharge from fifty percent to zero percent in a short period of time. Also when plugged into the charger. The phone battery will be fully charged. When you unplug it and watch charging, it shows 90% or even less. If it’s not damaged, your phone may not be properly calibrated.
The danger of not calibrating your phone’s battery is that it could shut down immediately without warning. Therefore, it is very important to calibrate the battery regularly.
If your phone’s battery exhibits any of the following symptoms, you might want to calibrate it as well:
1. Display a charging percentage for a long time when plugged in
2. Charging failed
3. The phone may report battery issues through a pop-up window.
4. Shows 100% charge, then drops to low percentage after unplugging the charger.
So how do you calibrate your phone battery?
The beginning of calibration is to design the measuring instrument that needs to be calibrated. In many cases, the cell phone battery that needs to be calibrated is designed by the manufacturer. Most phone calibration processes are automatic. Also, you can calibrate your phone battery yourself. Here’s what you can try:
1. Make sure your phone is fully discharged.
2. Turn it on and let it turn itself off.
3. Plug in the battery charger and do not open the phone.
4. Let the phone reach 100% power and unplug the charger.
5. Turn on your phone. If your battery has calibration issues, it may show a smaller percentage when you turn it on. Plug in the battery charger.
6. Unplug your phone and reboot. If the phone shows 100% when it restarts, reinsert the charger until it is fully charged.
7. Repeat the process until it shows 100% after opening it.
8. Finally, let your phone battery discharge to 0%, then turn it off. Now plug in the charger and the battery percentage will be reset.
As technology has advanced, battery calibration apps have been proposed. The process is similar to the one above:
Follow the steps above until the phone battery shows 100%. Make sure your battery is at 100% before launching the battery calibration app. Launch the app and start the battery calibration process. After the calibration process is complete, discharge the battery to 0% and let the phone shut itself down. Fully charge the battery without interruption with the battery turned off. Your phone battery will now be calibrated.
Does a factory reset calibrate the battery?
Erasing all of these files with a factory reset might help calibrate your phone’s battery. After a factory reset, it is recommended to run all available firmware and OS updates. This will help with the calibration process.
NOTE: Before calibrating your phone battery, perform a visual inspection of the battery. Check for any leaks, cracks or bulges. If you see any of this, your battery is damaged, calibration won’t help, and your phone battery needs to be replaced.
>>>>>>>>>>>Phone battery
Thanks for reading, hope it helps!
Friendly reminder: If you need to replace your phone battery, this battery store will be a good choice: www.batteryforpc.co.uk