Posted on

Apple: How to give your AirPods a new look

 How long have you worn your AirPods, or put them aside? Is it a long time, have you noticed that your AirPods have become very dirty, your long-term wearing may make your AirPods full of earwax, or you have left them aside for a long time and they are full of dust. Isn’t it scary! To keep your AirPods as new as they were when you first bought them, here’s how to clean them, let’s take a look!

Apple‘s AirPod Cleaning Instructions

Apple instructs you to use a slightly damp cloth and a soft, dry, lint-free cloth, and warns you not to use soap, shampoos, and solvents, or to run your AirPods underwater. To scoop out dirt from the microphone and speaker grids, Apple recommends using a dry cotton swab and a soft-bristle brush.

According to Apple, for the tje AirPods Pro, you can remove the earbuds and rinse them with water, but don’t use soap or other cleaners. Apple then wants you to follow its general rule of wiping the earbuds clean with a soft, dry, lint-free cloth and letting them dry completely before reassembling.

To kill any germs that might be hitchhiking on your AirPods, Apple says you can use 70% isopropyl alcohol wipes or Clorox disinfecting wipes to gently wipe down the outer surface (but not the speaker mesh). It’s best to avoid overly saturated wipes, as you don’t want any openings in your AirPods to get wet. Finally, no matter how dirty and disgusting your AirPods are, don’t dip them in any cleaning product.

Apple‘s method was tested. Tried using a Q-tip, but ended up just smoothing out the wax and dirt further. Then I used an old toothbrush to try to remove the roughness, with no better results.

Fun-Tak and Wooden Toothpicks

I could wipe the outside of the AirPods (and their case) with a dry cloth to remove dirt, but I needed a better way to get the wax and dirt out of the speaker’s mesh and hollows.

To remove wax and grime stuck in the cavity of the AirPod speaker, just grab a small piece of Fun-Tak and stretch and rub it to warm it up. Then press it on the speaker a few times and it will pick up wax and grime.

The stubborn bits that hit the sides of the speaker cavity can then be gently removed using a wooden toothpick. A wooden toothpick is sharp enough to pick out coarse waxy dirt, and it’s far safer than sharp metal objects like unfolded staples, which can scratch plastic or tear wire speaker mesh.

>>>>>>>>>>>>Apple battery

Posted on

These tips will help you extend the life of your phone!

 With the rising cost of new phones, extending the life of your existing smartphone can save you a lot of money in the long run. Some steps are as simple as cleaning your phone regularly, while others require more attention. However, you don’t need to be tech-savvy to take advantage of these tips to extend the life of your phone. They’re all easy to understand, and you can start changing your habits today to extend the life of your phone.

Whether you’ve just upgraded your phone or are thinking about it, we’ll show you how to keep your phone looking like new with some quick and easy tips. Let’s take a look below!

Don’t skip app updates

To keep your phone running as fast and trouble-free as possible, it’s important to update the operating system and third-party applications. These updates don’t take long, and the benefits can be huge: From bug fixes and security fixes to changes that bring new features and improve overall performance, make your device work smoother and faster.

Both Android and iPhone offer automatic app updates and should be enabled by default. You can check your Android phone by opening the Play Store, sliding out the menu from the left side of the screen, tapping Settings and making sure to select the option to automatically update apps. If you have an iPhone, go to Settings > App Store and make sure the App Updates option is on. However, this feature does not work in low power mode.

For system updates on Android phones, you can check for updates by opening the Settings app and searching for software updates. Google releases Android security updates around the first day of every month, so checking your phone mid-month for updates isn’t a bad habit.

For iPhone users, you can choose to have your phone automatically install any new updates. To install updates or turn on automatic updates, go to Settings > General > Software Update. If an update is available, follow the prompts to install it. If not, tap Automatic Updates to turn them on or off.

Deleting apps can help restore a slow phone

Phone storage and memory are limited, which is why it’s important to keep the number of unused apps to a minimum. Removing apps you don’t use from your phone regularly will save storage space and prevent apps from running in the background, using precious resources and making your phone feel slower and closer to its end of life than it really is.

Deleting apps on the iPhone is easy – just long press until the app is selected. You’ll see a drop-down menu from the app icon. Just select Remove App. You can then choose to delete the app from your phone, or just delete it from your home screen. Android users have more options, but a similar approach can be used: long press, select the “i” that appears in the App Info, and select Uninstall.

Keep the screen and ports clean

Even if you’re using a case, take a few minutes occasionally to remove any lint or dirt from the charging port, microphone area, speaker grill, and headphone jack. You can use a toothpick to get in there and coax out anything.

Avoid overwork and phone battery overheating

There are several myths involving cell phone batteries and keeping them healthy. We’ve looked at several battery myths recently and uncovered the truth about each.

Your phone will also last longer if you avoid putting your device in situations where the battery could overheat, such as if you’re sitting outside on a hot day, out of direct sunlight. If it gets too hot, it will shut itself off, but that puts a strain on the battery, which can lead to a shorter overall lifespan.

Replacing a damaged battery instead of a phone

Even if you’ve done everything by the book, you may still find yourself dealing with a battery that refuses to charge over time. Instead of replacing the entire phone, try replacing the battery.

Often this simple and cost-effective maintenance can add months or even years to the life of your phone. It would be easier if most phones were still made with removable batteries as they used to be, but most phones have embedded batteries that can’t be replaced without taking the phone apart. iPhone users can make an appointment at the Apple Store, or Android users can use a certified third-party repair service.

>>>>>>>>>>>>>Phone battery

Posted on

WatchOS 9: New features coming to your Apple Watch

 The Apple Watch Series 8 is expected to arrive later this year, but you probably don’t need the latest hardware to take advantage of Apple’s latest features. The company usually adds more features through software updates every year. Apple’s WatchOS 8 update introduces new watch faces made from iPhone’s portrait mode photos, a new app called Mindfulness to replace the Breathe app, and better workout detection for cycling.

A preview of Apple’s next major Apple Watch software update is expected at the company’s Worldwide Developers Conference in June. Based on the rumors and reports we’ve seen so far, it sounds like we can expect to see some battery improvements and more health and safety features.

A new low-power mode

Apple hasn’t made any major improvements to the Apple Watch’s battery life recently, but it may soon have a different fix. Apple plans to introduce a new low-power mode in WatchOS 9 that will allow the device to run some apps and features without consuming too much power. It sounds like this is different from the Apple Watch’s current power reserve feature, which only lets you check the time and disable other features to preserve battery life.

This new feature could help make up for the Apple Watch’s relatively short battery life, which typically lasts about a day and a half. This, combined with the faster charging of the Series 7, can significantly extend the battery life of your Apple Watch, which can be important if you’re using it for sleep tracking.

car accident detection

Apple Watch can already assess your walking stability and tell if you have fallen. Next, it might be able to detect car crashes. According to sources, Apple is planning to use sensors in the iPhone and Apple Watch to identify car crashes in real time. New features may roll out this year. It sounds similar to a feature Google already offers on its Pixel phones that automatically calls emergency services and shares your location if it detects you’ve been in a serious car crash.

More health features, including medication reminders

According to reports, the company plans to go a step further in an upcoming software update. Apple is likely to add new tools to the iPhone’s Health app this year, including medication reminders, sleep tracking and new features for women’s health.

While reports indicate that this will be part of the iPhone Health app, it seems likely that these additions could be coming to the Apple Watch in some way, if only through notifications.

New watch faces and workout types

Apple‘s software updates often introduce new watch faces and workout types, and it sounds like WatchOS 9 is no exception. The new watch faces and workout modes will be part of Apple’s upcoming software release, though it didn’t reveal many details.

In recent years, Apple has expanded Apple Watch workout options. It adds Pilates, Tai Chi and improved detection of cycling workouts in WatchOS 8. It also brings support for dance workouts to the 2020 watch.

Compatibility with older Apple Watch models

Apple‘s last two software updates were compatible with watches as old as the Series 3, but that could change in 2022. Series 3 may be retired due to inability to support new versions of WatchOS. This means that WatchOS 9 will likely be compatible with Series 4 and later, although we won’t know for sure until Apple rolls out the software.

September release date

If Apple sticks to its historical release pattern, we can expect to see WatchOS 9 in September. Apple typically releases its new software alongside new watch models, but 2021 is an exception.

Although we may have to wait until September, Apple is expected to detail the new features of WatchOS 9 at its Worldwide Developers Conference in June. Soon thereafter, it may also release a public beta of the software, allowing watch owners to try out unfinished versions of the software before the official release.

>>>>>>>>>>>>>Apple battery

Posted on

Windows 11 update will say goodbye to insecure file sharing

 With Microsoft announcing plans to eventually disable the SMB1 protocol across all of its operating system versions, sharing files on Windows 11 will soon be more secure.

For those unfamiliar, the Server Message Block (SMB) protocol was originally developed by IBM in the 1980s to make it easier to share access to files, printers, and other resources on a network. Meanwhile, SMB1 is a dialect of the protocol IBM created for sharing files in DOS.

In a new blog post, Ned Pyle, Principal Program Manager for the Windows Server Engineering Group, explained that Windows Insiders on the Dev Channel will be the first to see SMB1 disabled by default on all Windows 11 releases.

This makes sense since Microsoft has released Windows 10 and Windows Server without SMB1 installed since the Fall 2017 Creators Update. Now, however, this will extend to all versions of Windows 11, which will no longer have insecure file sharing protocols enabled.

Still available as an unsupported package

Although SMB1 is an insecure protocol, it is still used today to connect older NAS devices on Windows PCs. While the protocol will no longer be enabled by default after Windows 11, the change will not affect in-place upgrades of end-user machines already using SMB1. Microsoft also plans to remove the SMB1 binaries in a future release.

For businesses that still need to use SMB1 to connect legacy equipment such as factory machinery and medical equipment, the software giant will offer installation packages that are not supported out-of-band.

In his post, Nyle warned that Microsoft’s plans for SMB1 could create pain points for consumers still running older hardware, who might wonder why new business laptops running Windows 11 can’t connect to aging network hard drives Confused.

>>>>>>>>>>>>Laptop’s battery

Posted on

Apple Notes: How to set a password for extra privacy

 Apple’s Notes app is a convenient way to keep track of lists, articles, photos, and more. The app is included on iOS devices by default, and your Apple ID allows you to easily sync all your notes. If you use Notes as a journal or keep track of more personal information, you’ll need an extra layer of protection from prying eyes. The following will tell you how to password protect your notes, let’s take a look!

Here’s how to set it up on iPhone, iPad, and Mac.

How to Password Protect Notes on iPhone and iPad

1. Open the Notes app on your iPhone.

2. Start a new note or select an existing note.

3. Tap the three dots in the upper right corner.

4. Click the Lock button.

5. Create your password, re-enter it to verify and add a hint (if needed). You can also choose to enable Face ID or Touch ID.

6. Click Finish.

Your password-protected notes will now display a small lock icon next to the title when you open the Notes app. When you tap the note, you’ll be reminded that it’s locked and prompted for a password.

How to Password Protect Notes on Mac

1. Open the Notes app on your Mac.

2. Start a new note or select an existing note.

3. Click the lock icon in the upper right corner of the Notes app.

4. Click Lock Notes.

5. Create your password, re-enter it to verify and add a hint (if needed).

6. Click Set Password.

Similar to the iOS version of Notes, your password-protected notes will display a lock icon. You need to enter your password to open Notes.

Can I change my Notes password?

Yes, it just looks a little different depending on the device you’re using. When you initially lock a note, unless you specify otherwise in Settings, the same password will be applied to every locked note (so make sure it’s a strong password!) Here’s what to know:

iPhone and iPad

1. Open Settings on your device.

2. Scroll down and tap the Notes app in the left pane of the screen.

3. Click Password.

4. From here, you can tap Change Password or Reset Password.

Apple Computer

1. Open the Notes app on your Mac.

2. Tap the note in the upper left corner.

3. Click Preferences.

4. From here, you can choose Change Password or Reset Password.

Can I use Touch ID or Face ID to lock my notes?

Yes, but make sure you have Touch ID set up on your device. If you’re setting up a Notes password for the first time, you can choose Touch ID or Face ID instead of entering a password. Here’s how to add Touch ID or Face ID as an accessibility option for locked notes:

iPhone and iPad

1. Open Settings on your iPhone.

2. Find and open the Notes app.

3. Tap Password.

4. Toggle to use Touch ID. Now, when you try to open a locked note, you’ll be prompted to use your fingerprint or enter your password. Just follow the steps again to turn it off.

For Face ID, follow the steps below, but turn on Use Face ID instead.

Apple Computer

1. Open the Notes app on your Mac.

2. Tap the note in the upper left corner.

3. Click Preferences.

4. Check the Use Touch ID box under the Change Password and Reset Password buttons.

Can I remove the lock on the note?

Yes, but please note that if you remove the lock on your note, it will apply to every Apple device you log in with that ID. Here’s how it breaks down on iPhone, iPad, and Mac:

iPhone and iPad

1. Open the Notes app on your iPhone.

2. Select the locked note you want to unlock.

3. Enter your passcode using Face ID or Touch ID.

4. Click the More button.

5. Select Delete (you should not see the lock icon on the note now).

Apple Computer

1. Open the Notes app on your Mac.

2. Click the lock icon in the upper left corner.

3. Click Remove Lock.

4. Enter your password.

5. Click OK.

>>>>>>>>>>>>>Apple battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery, this battery store will be a good choice: www.batteryforpc.co.uk

Posted on

Windows 11: Microsoft Teams features for better video calling

 Windows 11 will get one of the best features of Microsoft Teams thanks to “Voice Clarity,” which will use artificial intelligence (AI) and machine learning to make your voice clearer in calls and recordings.

Microsoft Teams, the app that many people use for video calls, has very similar features that do a great job of reducing and canceling background noise from people in noisy environments, ensuring they can be heard clearly.

Since the feature has been well-received, it’s no surprise that Microsoft is bringing it to the wider Windows 11 operating system, which will allow the feature to work with other video calling apps. Voice Clarity was announced at Microsoft’s recent “Hybrid Work” event, and it’s one of the company’s ways to provide better products for people who now work from home and the office.

While the noise cancelling feature in Microsoft Teams has proven popular, there isn’t much love for the app itself, so its introduction to Windows 11 itself may prove to be a welcome move.

there is a question

While the idea behind making Voice Clarity available to more apps and users is that the feature is currently only available on Microsoft’s relatively niche product, Surface Laptop Studio. That’s a shame, of course, because it means the vast majority of Windows 11 users still don’t have access to the feature.

This may be due to some hardware-specific requirements that only Surface Laptop Studio has. Or, Microsoft might just limit the feature’s availability to help drive interest in Surface Laptop Studio.

But as more of us rely on video calls to keep in touch with friends, family and colleagues, any tool that can help improve those calls is certainly welcome, and we’d love to see Microsoft make Voice Clarity even better. Widely available.

>>>>>>>>>Laptop battery

Posted on

Apple: Use this hidden trick to quickly copy and paste between your iPhone and iPad

 Apple’s ecosystem makes it easy to work on your smartphone, move to another device, and pick up where you left off. Whether you’re browsing the internet, paying online, sketching or texting a friend, you can use a feature called Continuity that seamlessly connects all your Apple devices.

One of Continuity’s best tools is the Universal Clipboard. Using the Universal Clipboard, you can copy photos, videos or links on your iPhone, then jump to your iPad or MacBook and paste without any issues. If you’re already familiar with this tool, you know its usefulness. But we can also tell you about a hidden gesture that makes the Universal Clipboard easier to use. Let’s have a look!

Is your device compatible with Continuity?

In order for your Apple product to use Continuity, each device must meet the following requirements:

1. Sign in to the same iCloud account

2. Connect to the same Wi-Fi network

3. Bluetooth and toggle must be enabled

Also, while the Universal Clipboard feature works on most Apple devices, focusing only on touchscreen devices, they use pinch gestures with Continuity, so this will only work on compatible iPhone, iPad, and iPod touch models running at least iOS 10.

Easily copy and paste between iPhone and iPad using pinch gestures

There are several ways to copy and paste using the Universal Clipboard feature, but the quickest way is to use the pinch gesture:

Copy: three-finger pinch

Paste: pinch out with three fingers

The best way to use this feature is to use pictures and videos from the Photos app. Suppose you want to copy and paste photos from iPhone to iPad. All you need to do is open the Photos app on your iPhone, find the photo you want to migrate, and pinch with three fingers to copy it to the clipboard. To move a photo to another device, turn on your iPad, go to an app like Notes or Messages, and pinch with three fingers to paste the photo.

You can do the same with links and text, but they both need to be highlighted before using the pinch gesture to copy them to the clipboard and move them to another device.

>>>>>>>>>>>>Apple battery

Posted on

8 Clever Ways to Repurpose Your Old Android Phone

 If your phone is too old to trade in, or you’re looking to save some money on a webcam or Google Home, or you just want to tinker, there are some really neat ways to repurpose your old device and turn it into your real want to use something.

Since smartphones are small, powerful computers with storage space and cameras. Your phone is a handy replacement for many other electronics—you can even turn it into a home security camera or diagnose mechanical problems in your car. Here are some tricks that can give you a new look on your old Android, let’s take a look!

Turn your old Android into a webcam

You can use many free apps, including Zoom or Skype, to improve the quality of video chats during quarantine. Keep in mind that even an old phone’s main camera may be better than a laptop’s built-in webcam — or no webcam at all.

Convert your old Android to a Nintendo Game Boy

When you turn your Android into a Nintendo Game Boy, you can play video games on the go. All you need is a compatible Android phone and the $50 Hyperkin Smartboy mobile device to get started. In order to play games, you need to buy Game Boy cartridges. However, if you don’t have a retro cartridge, you can also play the Game Boy Advance app.

Store photos on your old phone

Images take up a lot of storage space on your device, so store them on your old phone. You can take photos with your new device and send them to your old phone to free up space.

Use your Android as a universal remote

It’s nice to have a remote that can do anything k. Being able to control all your devices from one remote is a relief. Download a remote control app, such as iRule, and sync your phone to devices including Xbox One, Roku, and Apple TV. If you have smart bulbs, you can also sync your phone with those bulbs.

Turn your Android phone into a Google Home

Reusing your Android phone as a Google Home smart speaker is easy, no app download required. Make sure your phone is updated to the latest Android OS so you can “OK, Google”. Next, you need to find a Bluetooth speaker to pair with your phone. Make sure both devices remain plugged in and turned on at all times. You can give Google an order right away.

Your Android can double as a home security camera

Download a security camera app, such as Alfred, to get started. Check your house while you work to make sure everything is fine. Put the phone in the main room of the house and you have the best view. When you’re at home, set it up outside to see who’s knocking on your door or to check for any suspicious activity.

Turn your Android into a wireless mouse

This can be annoying when your wireless mouse dies on you without warning. A backup will help, and you can turn your phone into a mouse in no time. To do this, you need to download an app, such as Remote Mouse.

Once you have the app, connect your phone and desktop to the same Wi-Fi network and say goodbye to the old mouse. Keep it in your laptop bag so you can stop for some work on the go or at a coffee shop.

Use your old phone as a music player

Free up storage space on your new phone by using your old phone as a media player. Since you have a new phone, you can wipe all data on your old phone. You can add as many songs as your old phone allows without worrying about how much storage space you’re using.

>>>>>>>>>>>>Phone battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery, this battery store will be a good choice: www.batteryforpc.co.uk

Posted on

Apple: 8 hidden iOS tricks every iPhone user should know

 Apple’s iOS is a far cry from the beginnings of iPhoneOS, and all the best iPhones are built on the operating system’s original promises. And the platform grows every year, adding new features with every update. With that in mind, we’ve put together a list of useful features you might have missed. Some are accessibility options, some need to be enabled, and some are just waiting to be used. However, all of these will make your iPhone experience better. Let’s take a look below!

1. Use the cursor to select text

If you’ve ever added a wrong word through autocorrect, but didn’t find it until you wrote dozens more words, this tip is for you. Of course, you can put your finger on the text to jump to it, but this sometimes causes whole words or sentences to be highlighted. For finer control, we recommend the following:

1. Place your finger or thumb on the bottom of the screen, below the keyboard.

2. This will grey out the keyboard and turn it into a trackpad until you lift your finger or thumb.

2. Create text snippets

Text snippets are popular among macOS power users, but you can achieve the same results with an iPhone. Even better, it doesn’t require any third-party software.

Text snippets are ideal shortcuts for copying certain phrases that you pre-registered. With text replacement, you can create a block of text to post as you type a phrase.

1. Open Settings, then go to General, then Keyboard.

2. Select text replacements and you will be able to create new replacements, along with the words needed to trigger them.

You can also set emoji to appear as you type, which feels pleasantly nostalgic you won’t get from the emoji picker.

3. Enable Scientific Calculator

The iPad may not have a calculator, but the iPhone does. The problem is that aside from adding, subtracting, multiplying, and dividing, it can feel a bit limiting — at least until you find a new perspective. Turning your iPhone aside with the calculator app open will enable the scientific calculator. This adds parentheses, square roots, cos/sin/tan options, the very handy pi command, and more.

4. Enable extra “buttons”

Although intended as an accessibility feature, the iPhone‘s “back click” button is handy for power users looking for extra input for their device.

1. Go to Settings, then Accessibility, then Touch.

2. Select Back Tap and you will see a lot of options.

You can use it in many ways. There are also double-tap and triple-tap options, which means you can set a variety of functions for it.

5. Use the camera’s “Burst Mode”

Your iPhone’s camera is powerful enough, but you may be missing a trick: burst mode. Burst mode, which means your iPhone can capture a series of action shots.

It’s also easy to access. Just swipe the shutter button to the left in the Camera app. You can also go into Settings, then Camera, and toggle Burst shooting with volume up to allow your volume rocker to trigger burst mode—just press and hold it while capturing an image.

6. Scan documents with your camera

Your iPhone camera can double as a very respectable document scanner, and while Live Text means you can extract text from images, it’s entirely possible to digitize entire documents. However, because it’s hidden in the Notes application, you may not have discovered how to do it.

1. Open Notes, then tap the camera icon, then Scan Document.

2. Highlight your document and it should automatically save. You can also scan manually using the shutter button.

3. After saving the scan, you can also sign it or just share it via any email or messaging app.

7. Use your camera flash as a notification

As an accessibility feature, you can trigger your iPhone’s camera flash to turn off when you receive a notification, giving you a more intuitive way to know that someone is calling or texting.

1. Go to Settings, then Accessibility.

2. In the Audio/Video section, there is an option “LED Flash for Alerts”.

You can also trigger it to only work when your phone is silent, which is ideal if you don’t want your phone to vibrate on a table.

8. Use Shazam to identify any song in Control Center

While Shazam has an app, you can also add it to your iPhone‘s Control Center for easy access.

Open Settings, then go to Control Center and click the plus button next to Music Recognition to add it.

Now, whenever you hear a good song playing, you can pull down from the control center and tap the Shazam icon to find out what’s playing.

>>>>>>>>>>>>>>Apple battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery of your device, this battery store will be a good choice: www.batteryforpc.co.uk

Posted on

Microsoft: This divisive Windows 11 feature may soon be improved

 The Microsoft Store in Windows 11 may soon let you download third-party widgets — tiny apps that provide at-a-glance information, such as current weather or local traffic. FireCube did some digging recently and found that the widget list has been updated to reference the download widget.

Microsoft‘s text informing users that they can “download new widgets and widget updates in the Microsoft Store” is another evidence that the eventual plan is for developers to put their third-party widgets in the Microsoft Store and have Windows 11 Users download whatever they want.

The Widgets panel will certainly be more useful, with a wider range of options and more room for customization, than the current situation where people can only use Microsoft’s own widgets in the panel.

As pointed out by Windows Central, which discovered this, its own Zac Bowden — a prolific source of Microsoft leaks — has previously stated that the widget panel is expected to get third-party efforts, plus new features, in fact, Developers already have a brief look at the functionality of third-party widgets. Previous leaks have also shown that third-party widgets are also inbound.

Extend the widget panel in multiple ways

With the newly discovered trove of evidence that Microsoft is preparing to implement third-party widgets, it seems likely that they will debut sometime in 2022.

Will this be related to the big update in the second half of 2022 (Sun Valley 2)? Maybe, but given that Microsoft has been adding stuff to Windows 11 so far this year — witnessing major interface changes on top of some recent major feature updates — then the clue now emerging may be that we can get an early update on the OS Install third-party widgets in . As for Microsoft’s other plans for widget panels, in its recent release of Windows 11 we did see a full screen panel; so that might be in the pipeline as well (it would provide more screen real estate to fill third-party widgets).

Of course, the widget panel is a divisive feature, and some people really don’t like it as a rather pointless element in the UI. Its usefulness is certainly limited in its current form, limited to Microsoft services. Opening up the ability to add tons of new widgets from across the store certainly helps make the panel a more compelling feature of Windows 11 and significantly improves the perception of this part of the interface.

>>>>>>>>>>>>>Microsoft Battery