M2 MacBook Pro teardown confirms what we’ve always suspected about laptops

 Apple’s MacBook Pro with the M2 chip is basically the same laptop as its predecessor, the MacBook Pro 13-inch M1, a teardown of the new laptop shows — which isn’t surprising.

The similarities are obvious, of course, and of course from the outside, the two generations of laptops have not changed in terms of design, the only real difference being the upgrade of the M1 SoC to the M2 and the option to choose more system memory. But now with an iFixit teardown, we know that internally, the M2 MacBook Pro is indeed pretty much the same as the M1 version, with the same chassis, display, touch bar, and internal layout, save for a few tweaks.

Essentially, Apple took the 13-inch MacBook Pro with the M1, removed that SoC, and put in the M2 to replace it, with only minor updates to other smaller internals.

The iFixit video of the teardown clearly shows that all cables, brackets, screws, ground pins, etc. remain the same – just the logic board is different and the heatsink has some tweaks.

So really, hardly anything has changed, although there is a slight difference, which is sadly negative. That said, the M2 MacBook Pro entry-level model actually has slower storage than the M1 MacBook Pro due to the different configuration of the SSD.

In theory, you should be able to fit an M2 board into an M1 MacBook Pro, iFixit has continued and successfully made this swap — except the laptop doesn’t work, or specifically the trackpad, keyboard, and Touch ID sensors no longer Jobs come into play after the exchange.

In short, iFixit concluded that it was Apple’s “blatant attempt to prevent repairs and replacements with a software lock.”

Analysis: Overall overshadowed and missed opportunities?

It’s disappointing that, as iFixit points out, Apple failed to take advantage of the better repairability and design sustainability that the M2 MacBook Pro could have taken advantage of.

As a result, the new 13-inch laptop feels rather bland and noticeably lagging behind, while another laptop recently shown alongside it at WWDC — the M2-powered MacBook Air expected to be available for pre-orders imminently — was greeted by many The eagerly anticipated, represents a complete redesign of portable devices.

Interestingly, at WWDC, Apple listed the 13-inch MacBook Pro as its second-best-selling laptop, behind the MacBook Air as the company’s best-selling laptop — and given that, such a small effort seems like a no-brainer felt rather strange. Already invested in launching a new model here.

>>>>>>>>>>Apple battery

AirPods can’t switch between devices? try these fixes

 Apple’s wireless AirPods and some Beats models automatically switch between devices depending on which device you’re using. If your AirPods won’t switch, here are some things to try.

Do your AirPods support automatic switching?

Not all models of AirPods (or Beats) support automatic device switching. You must be using AirPods Pro, 2nd or 3rd generation AirPods, AirPods Max headphones, Powerbeats or Powerbeats Pro earbuds, or Beats Solo Pro headphones for this to work.

You can find out which version of AirPods you have by connecting them to your iPhone or iPad, then navigating to Settings > Bluetooth and tapping the “i” button next to AirPods. On a Mac, you can do this by connecting them and then visiting System Preferences (or System Settings) > Bluetooth and clicking Options next to AirPods.

It’s worth noting that you’ll also need an Apple device for this to work. It’s not supported on Windows PCs or Android smartphones, but you can pair AirPods with almost any device and enjoy wireless audio.

Make sure “Auto connect” is enabled

To do this, you need to tell AirPods to automatically connect to each device you want to use. This setting is device-specific, so you can tell AirPods to automatically connect to your iPhone instead of your Mac.

To do this, go to Settings > Bluetooth, then tap the “i” next to AirPods on your iPhone or iPad. Under “Connect to this iPhone/iPad”, make sure “Automatic” is enabled. You can do the same on your Mac under System Preferences > Bluetooth by clicking the Options button next to your AirPods.

For any device you want to use this feature on, make sure to select “Automatic” in this box. If you want to exclude the device from automatic connection, select “Last connected to this <device>”. If you want to turn this feature off completely, select “Last connected to this <device>” on all your Apple gadgets.

Turn on automatic ear detection

When your AirPods detect that they’re in your ears, they’ll switch based on which device they think you’re using. This feature may still work if it is not enabled, but you will have a better experience with it enabled. You’ll also save battery life because your AirPods won’t stay on all the time when you open the case.

To do this, go to Settings > Bluetooth and tap the “i” next to AirPods, then turn on Automatic Ear Detection. On a Mac, go to System Preferences > Bluetooth, then click the Options button next to AirPods, then turn on automatic ear detection.

Make sure you’re using the same Apple ID on all devices

One of the best things about AirPods and Beats headphones is how they sync between devices using iCloud. This means you only need to pair your AirPods with a single device and they will work on all of your devices. The only caveat is that you need to share the same Apple ID on all devices.

Reboot the affected device

If you’re sure your AirPods or Beats are compatible, and you’ve checked your AirPods settings under Bluetooth and it’s still not working, try restarting whatever is causing you trouble. The same goes for your iPhone or iPad, but the steps to restart may vary depending on the device you have. Any software issues you may have that are causing the problem should be resolved by a full restart.

Make sure everything is updated

If it still doesn’t work, it’s worth checking that you meet the minimum software version requirements for this feature. If you do not meet these requirements, the feature will not work.

You can check which version of iOS or iPadOS you have under Settings > General > About This Mac on your iPhone or iPad. On a Mac, click the Apple logo and select About This Mac to see the installed version.

If you don’t meet the minimum requirements, try updating your iPhone, iPad or Mac to the latest software from Apple under Settings > General > Software Update or System Preferences > Software Update on your Mac.

Unpair your AirPods and start over

If you’ve tried everything else and met all the minimum requirements, try restoring your AirPods to factory settings by unpairing. You can do this by clicking the “i” button next to your AirPods or using the Options button next to your AirPods under System Preferences > Bluetooth on your Mac under Settings > Bluetooth.

Still not working? manual switch

If you’ve tried everything and it still doesn’t work, you can switch between devices manually. To do this on your iPhone or iPad, swipe down from the top-right corner of the screen, tap the Now Playing box, and select your AirPods from the options below the playback controls. On a Mac, you can click the Control Center icon in the upper-right corner of the screen, then click the AirPlay button next to the volume slider. You can also enable the “Show sound in menu bar” option on the Output tab under System Preferences > Sound for a quick toggle.

>>>>>>>>>>>>Apple battery

Motorola’s next flagship has a camera unlike any iPhone, Galaxy or Pixel

 Motorola’s next flagship — the Moto X30 Pro — is becoming an unorthodox entry in the flagship phone space, with new official camera details pointing to a system unlike anything we’ve seen on devices from rivals like Apple, Samsung or Google system.

Rumors about the X30 Pro have been around since January, however, recently, Motorola has been offering its own official teaser for the device. Let’s get a glimpse of the hardware the phone will offer.

It was previously reported that – according to spy photos provided by user Fenibook on Weibo, the phone will feature a huge 200MP sensor set in a camera module similar to that inspired by the Mi 12 / Vivo X60 Pro.

Shared to Chinese social networks from Motorola‘s official account on July 30, we now know what the focal lengths of the phone’s three rear sensors are, and they’re…unexpected.

While the promise of three rear cameras is nothing special, the Moto X30 Pro ditches the standard combination of main (wide), ultra-wide and telephoto that most rear triple-lens phones offer, opting instead for a 35mm Primary sensor, paired with dual 50mm and 85mm telephoto snappers.

While the zoom range isn’t particularly shocking, Motorola’s move from an ultra-wide-angle lens to a secondary lens for a dedicated portrait camera sets the X30 Pro’s system apart.

Motorola‘s next flagship will launch in China in the coming weeks, with a possible westward march to the UK, Europe and the US soon after.

Analysis: Moto’s own strengths

The trend for phones with multiple rear camera sensors started picking up around 2017, with the iPhone 8 Plus and iPhone X joining the Galaxy Note 8 as the first high-end phones to adopt the feature.

As far as high-end phones go, the three sensor setups these days almost always appear as primary, ultra-wide, and telephoto. By deviating from the status quo, Motorola has made the X30 Pro trickier to compare directly to other similarly specced competitors.

It also presents an opportunity for the company to innovate and dominate an area that has rarely been the focus of most phone makers’ camera efforts. Does the Moto X30 Pro have the stone to become the king of mobile portrait photography?

>>>>>>>>>>>>Motorola battery

How to install Windows 11 on an unsupported PC

 Windows 11 is almost a year old. Microsoft announced its new operating system at a dedicated event in June 2021, with the final release starting more than three months later. It makes some dramatic changes to the Windows experience that has become so familiar, including a new design language and native support for Android apps.

The gradual rollout of Windows 11 is almost complete, only older hardware has yet to receive the update. However, all eligible devices can now install it using this official method.

But what if your device isn’t compatible? Microsoft updated the hardware requirements for Windows 11, which means many older PCs aren’t eligible. But you can still install Windows 11. The lack of a CPU with TPM 2.0 is often the biggest sticking point, but there’s a workaround. A very similar method can also be used if you don’t have Secure Boot or have at least 4GB of RAM available.

Note that this is not officially supported by Microsoft, so do it at your own risk! ! !

In fact, as recently reported by Windows, Microsoft will repeatedly warn you that your device is not compatible with the new operating system. Both reminders in settings and watermarks on the Windows 11 desktop may appear, but that won’t prevent most apps from working properly.

You may have seen the news that Microsoft accidentally delivered Windows 11’s 22H2 update to unsupported devices. This means you don’t have to download the operating system from the Microsoft website first, but the rest of the process below remains the same. Let’s take a look at the specific steps below!

How to install Windows 11 on an unsupported PC

This method involves setting up a lab-like environment where you need to make changes to the registry. If you’re not happy with that, it’s worth buying a Windows 11-compatible device or sticking with Windows 10 until end of support in October 2025.

Microsoft will allow device manufacturers to disable the TPM requirement on their Windows 11 builds – you’ll do the same here:

1. Head over to the official Windows 11 download page to grab the new OS now – there are three options to choose from

2. Follow the step-by-step guide

3. If it does not meet the hardware requirements, you will see a message “This PC cannot run Windows 11”

4. On this screen, press Shift + F10 to open the Command Prompt window

Type “regedit” and hit enter

6. The Windows Registry Editor will now open. In the address bar, type “HKEY_LOCAL_MACHINESYSTEMSetup” and hit enter

7. You should now see a “Settings” key. Right click on it and select New > Key

8. You will now be prompted to give it a name. Select “LabConfig” and press enter

9. Right-click the new key you created and select New > DWORD (32-bit) Value

10. Name it “BypassTPMCheck” and set its data to 1

11. Do the same process for ‘BypassRAMCheck’ and ‘BypassSecureBootCheck’, same value of 1

12. Use the red X in the upper right corner to close this window

13. Type “exit” and press enter to close the command prompt window

14. You will now be returned to the “This PC cannot run Windows 11” message. Click the back button in the upper left corner

15. You should now be able to complete the installation normally

It’s worth noting that following these steps may affect performance or the stability of Windows 11. Proceed with caution and try it on a device other than your main PC if possible.

Is it safe to install Windows 11 on an unsupported device?

Not quite. Windows 11’s hardware requirements are mostly about security, even if many people think they’re too restrictive. Using an operating system that wasn’t designed to work without a TPM chip or secure boot is risky, but if your device meets most requirements, you might get away with it.

The older the hardware, the greater the risk. In any case, we recommend installing on a laptop or PC that is not your primary device. If this is unavoidable, make a full backup of your device first to make sure you don’t lose anything.

>>>>>>>>>>>>Computer battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery of your device, this battery store will be a good choice: www.batteryforpc.co.uk

Google’s DIY Pixel fix, and it looks better than Apple’s iPhone version

 Not long ago, Apple started allowing iPhone users to fix certain glitches themselves, and now Google is starting to offer a similar service to Pixel users.

In partnership with iFixit, Google now offers parts and repair kits to meet the needs of myriad mobile ailments, from the original Pixel to the Pixel 6 series — though the exact selection of parts and supported phones seems to vary by country.

You can order kits online and it will come with the relevant replacement parts, as well as the tools needed to install them. iFixit also provides detailed repair manuals for all supported fixable issues; available fixes include replacing the screen, rear camera, battery, and in some cases charging components.

Depending on the equipment and the problem, these repair kits can cost anywhere from $22.99/£24.99 (Pixel 2 camera) to $192.99/£189.99/AU$252.99 (Pixel 6 Pro screen). At launch, these kits are available in the US, UK, Australia and EU countries where the Pixel line of products is available.

Of course, these repairs aren’t for everyone—in general, we recommend having your Pixel repaired by a professional unless you’re confident in your work. Either way, another manufacturer that officially supports right-to-repair is great.

It’s a handy option for those with technical know-how or who can’t easily get their phone repaired elsewhere for whatever reason, and will keep their Pixel phones lasting longer — which is good for our wallets and the environment .

Analysis: How does this compare to Apple‘s self-service repairs?

From their perspective, Google’s repair service appears to have some advantages over Apple’s.

For one thing, replacement Pixel parts often look cheaper—though that can vary, depending on the component and region involved.

A key difference between these Pixel repairs is that you buy the related tools from iFixit, whereas Apple Self-Service Repairs just let you rent them. The latter may be more sustainable, but in addition to paying for equipment rentals, you’ll have a hefty sum on your card if you don’t return the kit in full on time. Such a huge cost is because Apple sends a whole suite of tools that will send the same selection regardless of your problem, whereas iFixit only sends the tools you need for your device’s specific ailment.

Another difference between Google and iFixit is that Apple Self Service Repair is only available in the US, although that will change. Still, given The Verge’s hassles when it comes to doing your own iPhone repairs, you might want to skip it, and it remains to be seen if Google’s will be easier.

>>>>>>>>>>>Phone battery

Why does my laptop keep restarting unexpectedly?

 Laptop restarting unexpectedly is caused by some kind of unrecoverable hardware or software problem. Laptops and desktops have software-related issues no different; they can often be resolved by updating, restoring, or removing the offending program. However, laptops have different hardware-related issues because they don’t have as many interchangeable parts as desktops. The following are the possible reasons and solutions, let’s take a look!

hardware compatibility issues

Hardware compatibility issues can cause the computer to restart at seemingly random intervals; on laptops, RAM and USB devices are the most likely causes of such compatibility issues. Two different RAM sticks installed in the same computer can cause memory usage issues that trigger a reboot. If you experience unexpected restarts, Sony recommends removing any extra RAM you have installed in your computer. Removing any attached USB devices can also solve the problem.

Dust problems and overheating

Laptops don’t take in as much air as desktops, but enough to bring in dust and debris to cause problems. If the system overheats, dust and debris can restrict airflow and cause the computer to automatically shut down. If the laptop overheats, it should shut down, but if it gets too hot, the device can be set to restart. System fan failure and restricted airflow can cause the system to overheat. Use compressed air to blow dust out of your laptop vents to improve airflow. In addition to restricting airflow, dust and debris can interfere with component connections. Try blasting vents and device connections to remove disturbing dust. Advanced users can try removing the RAM and hard drives to gain access to the relevant connectors and cleaning them with compressed air.

critical system error

Programs with error codes or errors in the operating system itself can crash the system. The computer can be configured so that instead of displaying an error message, it restarts. Try uninstalling any recently installed programs and rolling back recent program updates to stop program-related restarts. If you experience unexpected restarts, HP recommends rolling back recent Windows updates and not reinstalling them. Also, running a System Refresh or System Restore may step your computer back to the point where Windows and other programs won’t cause a restart error.

Program triggers restart

Some computer programs force the computer to restart after running automatic updates. Disabling automatic updates should prevent unexpected restarts. While system updates are a legitimate use of the reboot feature, programs such as viruses and other malware can trigger scheduled reboots, causing inconvenience to users. Running a full system scan with an updated antivirus program can remove this type of malware from your computer.

>>>>>>>>>>>>Laptop’s battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery of your device, this battery store will be a good choice: www.batteryforpc.co.uk

How to manage automatic updates in Windows 11

 Keeping your operating system up to date is one of the most important things you can do to ensure your device remains properly secured. Thankfully, you don’t have to worry about keeping track of every update that’s released, as Windows 11 is set to automatically download and install updates by default. However, automatic updates can sometimes appear at inopportune times, and sometimes you may want to delay if an update doesn’t include a patch for a security hole.

Why limit automatic updates in Windows 11?

Most updates shouldn’t negatively affect your device, but some may have issues that cause problems with an app or feature you use regularly. In this case, it’s best to wait for a fix for any issues that a particular update might have caused. Also, restarts and update installations can sometimes take hours, depending on your connection speed and the size of the update.

If you want more control over Windows 11 updates, you can do things like pause updates for a period of time, limit automatic updates to complete at certain times of the day, manually check for updates, or disable automatic updates entirely.

It’s worth reiterating that updates with critical security patches should be applied immediately to protect your device. However, if you want more control over non-essential updates, here’s how to manage automatic updates for Windows 11.

How to Pause Automatic Updates in Windows 11

You can pause automatic updates for a period of time – anywhere from one to five weeks – here’s how:

1. Go to settings

2. Click Windows Update

3. Under More Options, click the Pause Updates drop-down menu to select how long you want to pause automatic updates

If you want to resume automatic updates at any time before the end of the selected time period, you can click the Resume Updates button in the same Windows Update menu.

Note that you can’t pause updates indefinitely: after the pause period, you’ll need to install the latest update before you can use the pause feature again.

How to Disable Windows 11 Automatic Updates

If you want to disable automatic updates indefinitely, you can do this through a Windows service if you don’t mind getting a little technical know-how.

1. Press Windows button + R to launch the Run window

2. Enter services.msc in the text field and click OK

3. In the Services menu, click Windows Update

4. In the General tab, select Disabled from the Startup Type drop-down menu

5. Click the Apply button

To turn automatic updates back on, follow the same steps as above, then select Automatic from the Startup Type drop-down menu.

Even if you disable automatic updates using Windows Services, you can still download and install updates manually.

How to manually download and install Windows 11 updates

If you’ve disabled automatic updates on your Windows 11 PC, you’ll need to manually install updates as they become available.

1. Go to Settings

2. Click Windows Update

3. Click Check for Updates

If an update is available, you will be notified that the update is available for download. Click Download Now or Download and Install to run the update.

Advanced options for managing Windows 11 updates

Some updates require a system restart, which can be inconvenient if it happens in the middle of your workday. Thankfully, you can enable restrictions on when your computer can restart and complete automatic updates.

1. Go to Settings

2. Click Windows Update

3. Click Advanced Options

4. Click Active Time and set the time range you don’t want Windows to restart your PC

You can also select the “Keep me up to date” option to restart as soon as possible, even during your active hours. This option is useful when important updates are available and the time is convenient for you. With this option enabled, you will still be notified 15 minutes before reboot.

>>>>>>>>>>>>Laptop’s battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery of your device, this battery store will be a good choice: www.batteryforpc.co.uk

You can now check if your PC can install Windows 11’s first major update – here’s how

 Microsoft is putting the finishing touches on Sun Valley 2, the first major update to Windows 11 since its 2021 release, but users have been unsure if their PCs will be able to support it.

According to Windows Latest(Opens in a new tab), there is a way to go into the Registry Editor and check if your PC can update to 22H2 when available.

Known internally as Sun Valley 2, the company hasn’t made it clear what the update will involve, but a tab in File Explorer has been released, along with further updates to the Windows Media Player and Paint skins.

We expect these to appear in major updates, but of course, if your PC can’t update to it, it’s of no use to you. With that in mind, here’s how you can check.

Check the registry

The registry is the backbone of Windows and has been around for decades. It is a series of values ​​that will determine the settings for each application and various aspects of the operating system.

Based on a certain value, the PC will follow that command in the registry. But because of its design, there’s always the danger of a bad registry, parts of your PC appearing wrong, or not working as expected at all. However, when it comes to this short guide, it’s just a matter of finding a registry value, not changing anything.

1. On your Windows 11 PC, open the Windows Registry Editor by going to the Start Menu > and enter “regedit”.

2. In Registry Editor, select the address bar at the top and clear it.

3. Navigate to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\TargetVersionUpgradeExperienceIndicators

4. Once there, open the NI22H2 registry.

If you double click on the value, it should say “RedReason”. A value of NONE means your device is ready for a feature update. However, if this value shows anything else, your PC will not be eligible for 22H2.

While this won’t explain why your PC won’t update to 22H2, you can quickly check a few things and see if your eligibility has changed. Not having the latest Windows updates installed or running out of storage space may make you ineligible, so you can just change these updates to get your PC ready for 2H22.

If all of this is in order, unfortunately, it’s probably because your PC is too old to update itself.

>>>>>>>>>>>Laptop battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery of your device, this battery store will be a good choice: www.batteryforpc.co.uk

How to Fix Apple Notes Not Syncing Through iCloud

 Apple Notes is a free note-taking solution with some very powerful features, but sometimes you may find that your notes refuse to sync between iPhone, iPad, and Mac. The problem might be with how you organize your notes, or it might be a bigger problem that’s left you scratching your head. Let’s take a look below!

First: Make sure iCloud Notes is enabled

To display notes on other devices, they need to be synced via iCloud. To do this, you’ll need to make sure Notes are enabled in your iCloud settings, and check that you’re putting your notes into your iCloud account instead of storing them locally on your iPhone, iPad, or Mac.

To check if you have iCloud sync enabled for the Notes app on your iPhone, open Settings on your iPhone or iPad and tap your name at the top of the list. Select “iCloud” and scroll down until you see Notes. Make sure the toggle next to the app is enabled.

You can do this on your Mac under System Preferences (or System Settings) > Apple ID. Select iCloud from the sidebar and make sure there is a checkbox next to the Notes app. You need to do this on all devices where you want to display your notes.

It’s also worth checking to see if you have enough iCloud storage for Notes to sync. Your device may warn you about running out of space, but you can check manually by looking at the colored iCloud storage bar in this menu on either device. If you’re running out of storage space, you’ll need to buy more.

Next: Check if you added notes in iCloud

After enabling Notes in iCloud, launch the Notes app and view the top folder screen or sidebar. You should see a section titled “iCloud,” but you may also see another section titled “On My iPhone” or “On My Mac.”

If your notes are stored on your iPhone, iPad, or Mac, they won’t sync across devices. You need to move them to iCloud for it to work. To do this on an iPhone or iPad, tap a folder, then use the ellipsis “…” context menu button in the corner of the screen to “move” Move Notes to your iCloud account. On a Mac, you can simply drag and drop folders to the iCloud section.

You can do this the same way with notes by opening them and moving them around using the context menu, or dragging them on your Mac.

To ensure that new notes go directly to iCloud by default, check that the Default Account option in the note settings is set to iCloud. Access it under Settings > Notes on an iPhone or iPad or on a Mac by launching the Notes app, then clicking Notes > Preferences in the menu bar at the top of the screen.

You may have to wait a while for your notes to sync, especially if you have a lot of images or large attachments in your notes.

Update your device to the latest version

Sometimes, the iCloud service doesn’t work properly, and one of the reasons might be outdated software.

For best results, make sure your device is running the latest versions of iOS, iPadOS, and macOS before making any changes. You can do this under Settings > General > Software Update on an iPhone or iPad, or under System Preferences (or System Settings) > Software Update on a Mac this action.

Test your connection and disable any VPN

Problems syncing with iCloud can be explained by connectivity issues. If you are using a VPN, consider turning it off to see if this helps with your upload or download issues. You can do this using your VPN provider’s app or any third-party app you’re using.

After disabling the VPN, test the problem again by uploading or creating a new note. You can also try restarting network hardware like your router or modem and see if that helps.

kill the app and restart the device

You can kill the Notes app on your iPhone by opening the app switcher and flicking over the Notes app. On Mac, right-click the Notes icon and choose Quit or hold down the Option key to force quit the application when it becomes unresponsive.

At this stage, it’s also worth considering whether iOS, iPadOS, or macOS is the culprit. A simple reboot of each affected device will rule out issues caused by system processes not functioning properly.

>>>>>>>>>>>Apple battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery of your device, this battery store will be a good choice: www.batteryforpc.co.uk

How to Check for Apple Watch Updates

 If you have an Apple Watch, it’s not always obvious if you’re running the latest version of the Apple watchOS operating system. Here’s how to check for updates and how to perform them. Let’s have a look!

Apple Watch update related to iPhone update

Before updating your Apple Watch, you need to update your iPhone to the latest version of iOS. That’s because watchOS updates are currently tied to iOS updates, and you can’t get them separately. If your iPhone isn’t running the latest iOS version, you won’t see the latest watchOS update on your Apple Watch or the Watch app on your iPhone.

Usually, you will see the update automatically

As long as your iPhone is fully updated and your Apple Watch is connected to the Internet, your Apple Watch will usually alert you when a new update is available.

If you tap this screen and select the “Update Tonight” option while your watch is on your wrist, your Apple Watch will tell you that it will try to automatically install the update later tonight. For your watch to update overnight, it must be on a charger and connected to Wi-Fi. The installation will begin when your Apple Watch’s battery is at 50% or higher.

If you want to update now, open the settings on your watch and tap “Software Update.” Next, tap Download and Install or Install and place your Apple Watch on the charger. The installation will start automatically when the update is fully downloaded and the watch’s battery is at 50% or higher.

How to check for watchOS updates on Apple Watch

To manually check for watchOS updates on your Apple Watch, activate your Watch and open the Settings app, which looks like a gray gear. When the settings open, tap “General” and then select “Software Update.” If your Apple Watch is completely up to date, you’ll see the “Apple Watch is up to date” message on the screen. Otherwise, if a watchOS update is available, you’ll see the update’s version number listed, along with a brief description of the new features or bug fixes in that release.

To install the update, scroll down and tap “Download and Install” or “Install”, then place the watch on the charger. After downloading the update, Apple Watch will wait until its battery is at 50% or higher to install the update. Once that mark is reached, the installation will begin.

How to Check for Apple Watch Updates on iPhone

If you want to use your iPhone to check for Apple Watch system updates, first find and launch the Apple Watch app on your iPhone. Once loaded, tap on the watch you want to check for updates. Then, scroll down and tap “General,” then select “Software Update.”

The Watch app will check for updates, and if it’s completely up to date, you’ll see the “Your Apple Watch is up to date” message. In this case, you are done and you can exit the Watch app.

However, if a watchOS update is available, you’ll see it listed, along with information about the features of the latest version.

If you want to install the update right away, put your Apple Watch on a charger near your iPhone. Click Download and Install or Install. Enter your password if necessary. The installation will begin when the battery in your Apple Watch is at 50% or higher.

>>>>>>>>>>>Apple battery

Thanks for reading, hope it helps!

Friendly reminder: If you need to replace the battery of your device, this battery store will be a good choice: www.batteryforpc.co.uk