In Stock!
Your order will be dispatched within 48 hours. 
- Specifications
- Brand: Zebra
- Technology : Li-ion
- Voltage : 7.2V
- Capacity : 2280mAh
- Compatible part numbers: BTRY-MPM-22MA1-01 P1083277-002
- Compatible model number: Zebra ZR328 Thermal Label Printer
NOTE: Please verify your device’s model number to ensure that this part is compatible.
Designed to restore reliable performance and extend your device’s lifespan, this replacement part is essential for tackling battery issues and maintaining seamless functionality.
Zebra ZR328 Thermal Label Printer Battery Features
Upgrade your Zebra ZR328 Thermal Label Printer with a replacement our powerful new battery that enhances performance and extends the life of your valuable device in your pocket-friendly price.
Fully Tested: Each battery undergoes thorough quality checks before dispatch for you location. This ensures that you get a reliable, tested High quality product that meets the highest standards.
Zebra ZR328 Thermal Label Printer Battery (P1083277-002)
Zebra ZR328 Thermal Label Printer battery replacement P1083277-002 with a capacity of 2280mAh is one of the main components of a Other . If you have problems with Zebra ZR328 Thermal Label Printer not charging, does not turn on, or it is discharging quickly, this replacement part will help you. Battery malfunction and service life can depend on many factors: charging cycles, age, temperature changes, so it is usually recommended to replace it every 2-3 years when its capacity drops to 80% or less.
When do I need to replace the battery?
If you frequently experience unexpected shutdowns and / or battery life has significantly shortened.
What is battery charging cycles?
The reliability of lithium-ion/li-polymer batteries depends on the specifics of its use. Battery life is measured in charging cycles. One cycle is a cycle from full battery discharge (down to 0%) to full charge (up to 100%).
The battery can operate for approximately 500 full charge cycles, and exceeding the manufacturer's specified number of cycles can cause the battery to malfunction, usually its capacity is reduced and then the device discharges faster and needs to be recharged more often.
Recommendation: To prolong the life of the battery, you should try to start charging the battery from 15-25% and charge it up to 80%.
Step-by-Step Battery Replacement Guide
Power Down Your Device: Turn off your Zebra ZR328 Thermal Label Printer to ensure a safe battery replacement process.
Remove the Back Cover: Utilize the provided tools to carefully remove the back cover of your device.
Disconnect the Old Battery: Gently detach the old battery, ensuring not to damage any other components in the process.
Install the New Battery: Connect the new Mobile Battery for Zebra ZR328 Thermal Label Printer P1083277-002 to the designated slot, securing it in place.
Reassemble Your Device: Reattach the back cover, power up your device, and relish the enhanced performance with the new battery.
Optimize Battery Settings: Once your Zebra ZR328 Thermal Label Printer is powered up, navigate to your device settings and optimize the battery settings for improved performance and longevity.
Calibrate the Battery: To ensure accurate battery percentage readings, use your Other until it reaches 0%, then charge it to 100%. This calibration ensures more accurate readings in the future.
Frequently Asked Questions
Q: What are the common issues of a worn-out Zebra ZR328 Thermal Label Printer battery?
When the charging/discharging cycles are over, the battery performance reduces significantly, and you’ve to replace it. Below are the most common issues when you need a Zebra ZR328 Thermal Label Printer battery replacement :
The battery drains much faster and goes down to low levels very swiftly.
Due to prolonged use, the battery is swelled or puffed up.
The battery works up to 50%, and the phone automatically switches off.
The battery is bulging, and the display is protruding outwards.
The charging percentage goes up and down without doing anything.
These are the most common issues that warrant an urgent replacement.
Q: How can I check the battery’s health myself?
Please navigate to the Settings--> Battery section of your phone. There, you can see all the vital details of the battery. You’ll also see a nice graph showing the battery consumption details. You can see which apps are eating up the resources, and this information allows you to manage the battery more efficiently.
- + Zebra MC2700 MC22 MC27 MC220K
- + Zebra CS6080
- + Zebra CS6080
- + Zebra RS51 RS5100 Single Finger Blu...
- + Zebra EZ320 Scanner
- + Zebra DS22 DS2278 DS2278SR CR2278
- + Zebra QL 420
- + Zebra TC21 TC26 TC26AK TC2X
- + Zebra ZQ200 ZQ210 ZQ21-A0E12KE-00
- + Zebra TCXX
- + Zebra MC17
- + Zebra DS2278SR
- + Zebra MC55 MC65
- + Zebra Symbol TC55 BTRY-TC55-44MA1-0...
- + Zebra Symbol SB1 TSD Scanner
- + Zebra ZR138 P1098850-001 P1098850-0...
- + Zebra MC55 MC65 MC67 MC55A0
- + Zebra TC70 TC75
* Zebra model Other Batteries
