How to Fix GPD Pocket 2 Battery Not Charging Issues

If your GPD Pocket 2 battery is not charging, you’re not alone. Many users have faced this issue, but fortunately, there are several troubleshooting steps you can take to resolve it. Here’s a guide to help you identify the problem and find a solution.

1. Check the Basics First

Before diving into complex fixes, ensure:

The charging cable and adapter are working by testing them on another device.
The charging port is clean and free from dust or debris.
You are using the original charger or one with the correct voltage (5V/2A or 12V/2A recommended).

2. Perform a Hard Reset

Sometimes, a simple reset can fix charging problems:

Press and hold the power button for about 10-15 seconds.
Wait a few seconds and then try plugging in the charger again.

3. Check the Battery Connection

If the issue persists, the battery connector inside the device may be loose:

Open the back panel carefully using a small screwdriver.
Locate the battery connector and make sure it is securely attached.
Reassemble the device and try charging again.

4. Update BIOS & Drivers

Outdated BIOS or power management drivers can cause charging issues. To update:

Visit the official GPD support website and download the latest BIOS and drivers.
Follow the update instructions carefully.

5. Try an Alternate Charging Method

Some users have had success charging through a USB-C PD charger instead of the regular adapter.
If your charger supports different power outputs, try using a different voltage setting.

6. Replace the Battery

If none of the above steps work, your battery might be faulty. Consider replacing it with a compatible battery from GPD or a trusted third-party supplier.

Final Thoughts

A non-charging GPD Pocket 2 can be frustrating, but with the right troubleshooting steps, you may be able to fix it without professional repair. If the issue persists, contacting GPD customer support might be your best option.

2025-03-31 03:52:55